How microcontrollers and single-board computers coordinate high-speed RF acquisition and generation. How SCPI and UART commands let simple controllers use advanced measurements without FPGA ...

At Hardware Pioneers Max 2026, it was great to bump into Arduino's Field Engineering Evangelist, Julián Caro Linares, who introduced me to a smart mirror... It runs AI locally via the new Arduino ...

This is a library for the Si5351 series of clock generator ICs from Silicon Labs for the Arduino development environment. It will allow you to control the Si5351 with an Arduino, and without depending ...

The Red Pitaya board was first introduced in 2013 as an Xilinx Zynq 7010 SoC FPGA board designed as a high-performance tool acting as an oscilloscope, spectrum analyser, waveform generator, and more.

Article subjects are automatically applied from the ACS Subject Taxonomy and describe the scientific concepts and themes of the article. Based on the considerations outlined above, recent years have ...

IntroductionIf you are an electronics student, hobbyist or researcher and have your own electronics lab. Then you might have many electronic instruments like multimeter, power supply, frequency ...

Abstract: This article presents a new procedure for phase detector measurements that allows the use of generators that share a 10-MHz reference oscillator but do not synchronize in phase, in other ...

A mixer is a special type of electronic circuit that combines two signals (periodically repeating waveforms). Mixers find a lot of use in audio and RF systems and rarely used as simple analog ...

This library offers an easy way to encode and decode CCIR476 symbols on your Arduino for SITOR, AMTOR and Navtex message encoding and decoding. The best way to install the library is via the Arduino ...

A Signal Generator is one of the most important lab equipment for an Electronics Engineer. A waveform or an electrical signal is generated using this device which lets an engineer to design and ...