Based on the face-centered cubic structure, several different types of cubic lattice structures are designed in this paper, the quasi-static compression behavior of the lattice structure is thoroughly ...

Modulus of elasticity of concrete(Ec) is defined as the ratio of the applied stress to the corresponding strain. Not only does it demonstrate the ability of concrete to withstand deformation due to ...

Emin formula accounts for modifications due to shear, variations in material properties, and safety considerations, as detailed in Appendix D of the NDS. The value representing the lower 5% of the ...

The seepage failure induced by high water pressure along the fault structural plane is one of the main factors for the deformation and failure of underground caverns. Based on the pipe domain seepage ...

Human bone cells live in a complex environment, and the biomimetic design of porous structures attached to implants is in high demand. Porous structures based on Voronoi tessellation with biomimetic ...

Liebau pump is a tubular, non-peristaltic, pulsatile pump capable of creating unidirectional flow in the absence of valves. It requires asymmetrical positioning of the pincher relative to the ...

Article subjects are automatically applied from the ACS Subject Taxonomy and describe the scientific concepts and themes of the article. We can know from the above research that different binders were ...

The rock contains many inclusions which produce high locked-in stress under the ground stress. In order to study the influence of locked-in stress on the mechanical properties of rocks, the rock-like ...

Fracture mechanics has long been an essential tool for ensuring safety, efficiency, and durability in the mechanical, aerospace, nuclear, naval, petroleum, and other industries. Recently, with the ...

1 School of Chemical Engineering, National Technical University of Athens, Zografou, Athens, Greece. 2 Titan Cement Group, Laboratory of Concrete Technology, Kamari, Αthens, Greece. The deterioration ...

There are several requirements established in ACI 318-19 (Building Code Requirements for Concrete and Commentary) that concrete materials need to meet; otherwise, it would not be suitable for the ...

Predominantly, if the metal part used in compression molding is tension or compression loaded, a ratio of metal part thickness to its extensional modulus, multiplied by the Bulk Molding Compound (BMC) ...